Automation · Robotics · AI integration

We push the limits of automation.

For more than 15 years we have been bringing special-purpose machines to life with Siemens controls and robotics. Now we are making them intelligent – with AI that is integrated into your line cleanly and safely.

Siemens PLC & HMIIndustrial & cobot roboticsAI visionDigital twinOn-premise AI

There are plenty of AI consultants. Putting AI into a running machine – with PLC, robot and CE compliance – takes real automation know-how first. That is exactly where we come from.

Services

Solid foundation. New possibilities.

We combine classic control engineering with modern AI – from a single source, from concept to commissioning.

01

Automation

Control and visualisation software for special-purpose machines based on Siemens SIMATIC and TIA Portal.

  • PLC and HMI programming
  • On-site commissioning
  • Remote maintenance and service
02

Robotics

Integrating industrial robots and cobots into your line – from the cell to communication with the PLC.

  • Robot and cobot integration
  • Machine tending and handling
  • Gripper and cell concepts
New 03

AI integration

We bring artificial intelligence to where it makes a difference: right into the machine.

  • AI vision
  • Digital twin
  • AI-driven usability

Turnkey systems as general contractor

If you wish, we take full responsibility: we plan, coordinate and deliver the complete special-purpose machine and hand it over ready for operation and CE-compliant. One contact, one contract, one responsibility.

  • Concept and project management
  • Mechanical design and manufacturing
  • Electrical design and control cabinet
  • PLC, HMI and robotics
  • Risk assessment and CE marking
  • Commissioning and acceptance
AI integration

AI that works on the shop floor – not just on slides.

Three areas where AI already delivers measurable value in automation today.

01

AI vision

The machine sees what it picks and inspects.

Cameras and neural networks recognise parts, positions and defects – even where classic machine vision reaches its limits. The result goes straight to the PLC and robot.

Object detectionPose estimationQuality inspectionEdge AI
Flange 0.98 Flange 0.97 37° Crack 0.91 CAM 01
Edge AIdetects part, pose, defects
To PLC / robot
Part
Flange type B
Pose
X 412.3 · Y 118.7 · R 37°
Pick
released
Inspection
1 × NOK – crack
02

Digital twin

Test before the machine is built.

A digital replica of line, controls and robot: simulate sequences, commission software virtually and validate changes before they reach the real machine.

Virtual commissioningAutomated test scenariosSynthetic training dataShorter commissioning
Already there
  • CAD data
  • Wiring diagram
  • PLC code
AI generates
Digital twinKinematics · sensors · sequence

Real machine data keeps it up to date

Result
  • Thousands of test and fault scenarios
  • Training data for AI vision
  • Virtual commissioning
Until now

Every twin had to be modelled by hand: kinematics, sensors, the behaviour of each component. That takes weeks – and it is out of date as soon as something changes on the real machine. In special-purpose machinery, where every line is one of a kind, the effort rarely paid off.

With AI

AI generates large parts of the twin from what already exists – CAD data, wiring diagrams, PLC code – and keeps it up to date with real machine data. It runs through thousands of sequences and fault scenarios nobody would test by hand, and produces training data for machine vision before the first part is made. The expensive one-off model becomes a tool that pays off even for single machines.

03

AI-driven usability

Operate machines in natural language.

Language models right at the HMI: operators ask instead of searching the manual, and faults are explained in plain language – including the next step. New staff get up to speed faster, experienced operators save time.

Natural languageFault diagnosisHMI assistantFaster onboarding
Station 3Fault
14:02Alarm 2041 · Part not in fixture

Why has the station stopped?

Assistant

Sensor B12 has reported no part in the fixture since 14:02. Most likely cause: the part tilted while being loaded.

  1. Open the guard door, check the part in the fixture
  2. Close the door, acknowledge the fault
  3. Start automatic mode
Source: alarm text · operating manual ch. 7 · wiring diagram sheet 23
Ask a question …
Safety

AI sees. Safety decides.

Every machine builder rightly asks two questions: what happens when the AI gets it wrong? And where does my data end up? Our answer is a clear architecture.

Strictly separated

AI perception and certified safety functions run on separate hardware. The AI can never override a safety function.

Safe even when things fail

If the AI fails or delivers implausible results, the machine remains in a safe state.

CE built in from day one

Risk assessment and conformity under the EU Machinery Regulation 2023/1230 are part of the concept, not an afterthought.

On-premise, not cloud

Every AI model – from machine vision to language models – runs right at the machine or in your plant. No dependence on the internet or a cloud provider, no latency, and your process and image data never leave the site.

AI perception and safety functions are separate AI PATH Camera Image data Edge AI Detection · on site PLC / robot Motion · process SEPARATED SAFETY PATH Safety sensors Safety controller Safe stop Certified components · independent of the AI
Coming soon

Our first own product.

Intelligrip brings AI-assisted machine tending to your machine tool – mobile, safe and quick to deploy. Everything we know about automation, robotics and AI, in one system.

Launch 2027CobotAI-VisionFor machine tools
Join the waiting list
About us

From special-purpose machinery. For special-purpose machinery.

bitZS was founded in 2020 in Kirchdorf an der Krems, Upper Austria – by people who had already spent many years programming and commissioning special-purpose machines and leading projects.

We know the pressure of a commissioning deadline, the quirks of every line and the expectation that a machine simply has to run. Today we combine that experience with software engineering and artificial intelligence – and use it to develop our own products.

15+years of experience in special-purpose machinery
2020founded in Upper Austria
PLC + AIautomation and AI from a single source
2027launch of our first product
Contact

Let’s talk about your machine.

Whether it is classic automation, robotics or the question of whether AI can make your line better – we listen and tell you honestly what makes sense.

Emailoffice@bitzs.at Phone+43 7582 20 30 21
AddressKirchenmühlstraße 5/2
4560 Kirchdorf an der Krems, Austria